Custom Branded Cherry and Walnut Trim Wood Charcuterie Cutting Board (Min Qty 5)

Description

Custom Branded Promotional or Special Event Charcuterie Boards

The custom branded Cherry and Walnut Trim Wood Charcuterie Board is a beautiful choice for restaurants, catering, weddings, business or corporate gifts, real estate agency gifts or special events.  The cherry walnut cutting, or charcuterie board is sized at 9 x 12 inches and is .75 inches deep.  The weight is 1.825 lbs. The board is made from solid wood. This board features a beautiful cherry center with walnut trim along the edges.

These boards laser engrave beautifully with your custom brand/logo. There is a minimum order quantity of 5 boards, which are sold in increments of 5. All of our high quality, commercial laser engraving services are done in-house by Portal of Hope.  The board is perfect for serving charcuterie, appetizers, or highlighting entrees or cutting.  Please note that due to the grain, color and cut of wood, each board will be unique. The boards are made in the United States. Please see wash and care instructions. It is recommended to contact Customer Service to check on product availability prior to ordering.

Laser Engraved Specifications

Each board is laser engraved with a single, artwork/branding/logo on the front at $72.00 per board. We do not laser engrave photos. There is a $40 setup charge.

Artwork Specifications

The laser engraving artwork requires single color artwork. The quality of the artwork we receive will directly impact the quality of the laser engraving. Low resolution files cannot be accepted. Please refer to details under ‘Upload Artwork’ for further specifications.

About the Brand and Manufacturer

Additional information

Weight	1.9 lbs
Dimensions	10 × 13 × 1.5 in
Color	Cherry Walnut
Size	9 x 12
Material	Wood
Brand	Portal of Hope

Follow these simple instructions to keep your board looking beautiful and to extend the lifespan of your board. 1. HAND WASH FOR BEST RESULTS Boards should never soak in water. This can cause them to warp or crack. Simply wash your board with warm soapy water and dry it off. You should wash both sides of the board when you wash it. 2. DRY YOUR BOARD THOROUGHLY After washing, dry the board thoroughly. It is best to store the board either hanging or standing on edge, so both large sides get completely dry. Make sure you store your board in a dry area, not on a wet countertop, as it will not allow the wood to dry properly. 3. OIL YOUR BOARD Use a food grade mineral oil on the board and recommend this be applied based on the amount of use. Any generic food grade mineral oil is fine, as well as any cutting board or butcher block oil. Your board needs a coat of oil when it starts to look dry, or the grain does not look as beautiful. The mineral oil both keeps the board looking great and keeps the wood from drying out. Food grade mineral oil is the preferred oil for this, as it is food safe, inexpensive and will not go rancid as some other oils can. Apply the oil evenly to the entire board with a lint-free microfiber cloth. You do not need enough oil to puddle on the board – just enough to coat the board. Let the oil soak in and dry, just as when you wash and dry it normally.